Agonist activity at human C-terminal Smbit-tagged ACKR3 assessed as beta-arrestin recruitment by Nanoluciferase complementation-based assayAgonist activity at human C-terminal Smbit-tagged ACKR3 assessed as beta-arrestin recruitment by Nanoluciferase complementation-based assay
Agonist activity at human C-terminal Smbit-tagged ACKR3 assessed as beta-arrestin recruitment by Nanoluciferase complementation-based assayAgonist activity at human C-terminal Smbit-tagged ACKR3 assessed as beta-arrestin recruitment by Nanoluciferase complementation-based assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assayAgonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assay
Agonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assayAgonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Agonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assayAgonist activity at human CXCR7 expressed in HEK293T cells co-expressing beta-arrestin2-YFP assessed as beta-arrestin2 recruitment after 1 hr by BRET assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assayAgonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assay
Agonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assayAgonist activity at human CXCR7 expressed in HEK293 cells assessed as reduction of receptor surface expression after 1 hr by ELISA based internalization assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity against ACKR3 (unknown origin) assessed as induction of beta-arrestin 2 recruitmentAgonist activity against ACKR3 (unknown origin) assessed as induction of beta-arrestin 2 recruitment
Agonist activity against ACKR3 (unknown origin) assessed as induction of beta-arrestin 2 recruitmentAgonist activity against ACKR3 (unknown origin) assessed as induction of beta-arrestin 2 recruitment
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin 2 recruitment by luciferase based NanoBiT assayAgonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin 2 recruitment by luciferase based NanoBiT assay
Agonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin 2 recruitment by luciferase based NanoBiT assayAgonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin 2 recruitment by luciferase based NanoBiT assay
Agonist activity at full length N-terminal HA-tagged human ACKR3 expressed in HEK293S cells assessed as beta-arrestin 2 recruitment incubated for 60 mins by BRET assayAgonist activity at full length N-terminal HA-tagged human ACKR3 expressed in HEK293S cells assessed as beta-arrestin 2 recruitment incubated for 60 mins by BRET assay
Agonist activity at full length N-terminal HA-tagged human ACKR3 expressed in HEK293S cells assessed as beta-arrestin 2 recruitment incubated for 60 mins by BRET assayAgonist activity at full length N-terminal HA-tagged human ACKR3 expressed in HEK293S cells assessed as beta-arrestin 2 recruitment incubated for 60 mins by BRET assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin recruitment incubated for 30 mins by BRET assayAgonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin recruitment incubated for 30 mins by BRET assay
Agonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin recruitment incubated for 30 mins by BRET assayAgonist activity at human ACKR3 expressed in HEK293 cells assessed as beta-arrestin recruitment incubated for 30 mins by BRET assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Agonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence methodAgonist activity at human CXCR7 expressed in CHOK1 cells assessed as induction of beta-arrestin recruitment by chemiluminescence method
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Activation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assayActivation of human ACKR3 overexpressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment incubated for 90 mins by luminescence based assay
Antagonist activity at CXCR7 in human Tango CXCR7-bla U2OS cells co-expressing TEV-fused-beta-arrestin using CCF4-AM as substrate incubated for 2 hrs and measured by FRET assayAntagonist activity at CXCR7 in human Tango CXCR7-bla U2OS cells co-expressing TEV-fused-beta-arrestin using CCF4-AM as substrate incubated for 2 hrs and measured by FRET assay
Antagonist activity at CXCR7 in human Tango CXCR7-bla U2OS cells co-expressing TEV-fused-beta-arrestin using CCF4-AM as substrate incubated for 2 hrs and measured by FRET assayAntagonist activity at CXCR7 in human Tango CXCR7-bla U2OS cells co-expressing TEV-fused-beta-arrestin using CCF4-AM as substrate incubated for 2 hrs and measured by FRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay
Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Agonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Modulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence methodModulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence method
Modulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence methodModulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence method
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assayAgonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assay
Agonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assayAgonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at wild type CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D179N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Activation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 S198R mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Agonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Agonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 S198R mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Agonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D179N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Modulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence methodModulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence method
Modulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence methodModulation of ProLink-fused human CXCR7 expressed in CHOK1 cell membranes assessed as induction of EA-tagged beta-arrestin recruitment after 30 mins by chemiluminescence method
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
Activation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 D275N mutant (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 D275N mutant (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assayAgonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assay
Agonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assayAgonist activity at human ACKR3 expressed in HTLA cells assessed as stimulation of beta-arrestin recruitment incubated for 16 to 20 hrs by bright-glo luminescence assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay
Modulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assayModulation of prolink-tagged human CXCR7 expressed in CHO-K1 cells assessed as induction of beta-arrestin recruitment after 30 mins by beta-galactosidase reporter assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Activation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assayActivation of YFP-tagged ACKR3 (unknown origin) expressed in HEK293E cells assessed as induction of Rluc-tagged beta-arrestin-2 recruitment after 30 mins by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Agonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assayAgonist activity at CXCR7 (unknown origin) expressed in HEK293E cells co-transfected with receptor-eYFP construct and beta-arrestin2-Rluc assessed as induction of receptor-mediated beta-arrestin recruitment by BRET assay
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).In Vitro Assay: CHO-K1 CXCR7 b-arrestin cells are detached from culture dishes with a cell dissociation buffer (Invitrogen, #13151-014) and collected in growing medium (F12 HAMS 90% (v/v)/FCS 10% (v/v), Penicilin/streptomycin 1% (v/v)). 5000 cells per well (in 20 μl) are seeded in a 384 well plate (white-walled, clear bottom; BD Falcon #353274). The plate is incubated at 37° C./5% CO2 for 24 hours. Medium is then replaced by 20 μl OPTIMEM (Invitrogen #31985) for 3 to 4 hours. Test compounds are dissolved at 10 mM in DMSO and serially diluted in DMSO to 200× of the final concentration for dose response curves. Compounds are then diluted 1:33.3 in HBSS1×. 5 μl/well of HBSS1×/20 mM HEPES/0.2% BSA are added to the assay plate followed by addition of 5 μl/well of diluted compounds. CXCL12 (Peprotech #300-28A) may be used as a reference agonist. The plate is incubated for 90 minutes at 37° C. 12 μl of detection reagent (Path Hunter Detection Kit, DiscoveRx, #93-0001) is transferred to the assay plate and to the plate is incubated for 1 hour at room temperature. Luminescent signal is read in a microplate reader (FLUOstar Optima, bmg).
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1.97 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1.97 nM CXCL12 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1.97 nM CXCL12 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1.97 nM CXCL12 level
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 12.3 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 4.11 nM CXCL11 level
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 37 nM CXCL11 level
Antagonist activity at dog CXCR7 expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at dog CXCR7 expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Antagonist activity at dog CXCR7 expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at dog CXCR7 expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Antagonist activity at mouse CXCR7 expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at mouse CXCR7 expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Antagonist activity at mouse CXCR7 expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at mouse CXCR7 expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 111 nM CXCL11 level
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 333 nM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL11 level
Insurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL11 levelInsurmountable antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL11 induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 25.5 hrs in presence of 1 uM CXCL11 level
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at rat CXCR7 expressed in HEK293 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at rat CXCR7 expressed in HEK293 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Antagonist activity at rat CXCR7 expressed in HEK293 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrsAntagonist activity at rat CXCR7 expressed in HEK293 cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response incubated for 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 minsAntagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 mins
Antagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 minsAntagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 mins
Antagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 minsAntagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 mins
Antagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 minsAntagonist activity at human CXCR7 receptor expressed in CHOK1 cell membranes assessed as reduction in beta-arrestin recruitment incubated for 30 mins
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Inhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assayInhibition of [125I]SDF-1alpha binding to CXCR7 (unknown origin) expressed in CHO cell membranes incubated for 1 hr by radioligand displacement assay
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 additionAntagonist activity at CXCR7 (unknown origin) expressed in CHO-K1 cells co-expressing beta-arrestin assessed as reduction in compound-1 induced response pre-incubated for 15 mins before compound-1 addition
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Displacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting methodDisplacement of [125I]SDF-1alpha from ACKR3 (unknown origin) expressed in CHO cells after 1 hr by scintillation counting method
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Displacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysisDisplacement of [125I]SDF-1alpha from CXCR7 (unknown origin) expressed in CHO cells after 1 hr by TopCount scintillation counting analysis
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Antagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrsAntagonist activity at CXCR7 (unknown origin) expressed in human U2OS cells co-expressing beta-arrestin assessed as reduction in CXCL12-alpha induced response pre-incubated for 15 mins before CXCL12-alpha addition and measured after 24 hrs
Binding affinity to SNAP-tag fused human CXCR7 expressed in HEK293 cells by HTRF assayBinding affinity to SNAP-tag fused human CXCR7 expressed in HEK293 cells by HTRF assay
Binding affinity to SNAP-tag fused human CXCR7 expressed in HEK293 cells by HTRF assayBinding affinity to SNAP-tag fused human CXCR7 expressed in HEK293 cells by HTRF assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from mouse CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assayDisplacement of [125I]-CXCL12 from human CXCR7 receptor expressed in CHOK1 cell membranes incubated for 2 hrs by radiolabeled ligand binding assay
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrsDisplacement of [125I]-CXCL12 from human CXCR7 expressed in HEK293 cells after 3 hrs
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]CXCL12 from human CXCR7 expressed in CHO-K1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method
Displacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting methodDisplacement of [125I]-CXCL12 from human CXCR7 expressed in CHOK1 cell membranes after 2 hrs by scintillation counting method